Innovative Products, Unmatched Quality

Providing and laying integral cement based treatment for water proofing on the
vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement
slurry mixed with water proofing compound conforming to IS:2645 in recommended
proportions with a gap of 20 mm (minimum) between stone slabs and the receiving
surfaces and filling the gaps with neat cement slurry mixed with water proofing
compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement
: 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing
compound in recommended proportion complete at all levels Using rough Kota stone.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels Using rough Kota stone.

₹ 1,036.90

Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces etc
consisting of following operations: a) Applying a slurry coat of neat cement using
2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS.
2645 over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface
with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test. With average thickness of 120 mm and minimum thickness at khurra as 65 mm

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. With average thickness of 120 mm and minimum thickness at khurra as 65 mm

₹ 882.60

Providing and laying six courses water proofing treatment with bitumen felt over
roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15
conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of
area respectively, second and fourth courses of roofing felt type 3 grade I
conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS
: 1322 and sixth and final course of stone grit 6 mm and down size or pea sized
gravel spread at 6 cubic dm per sqm including preparation of surface but excluding
grading, complete.

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete.

₹ 455.25

Providing and laying six courses water proofing treatment with bitumen felt over
roofs consisting of first, third and fifth courses of blow or / and residual bitumen
applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second
and fourth courses of roofing felt As per IS 7193 grade II (glass fibre base self
finished bitumen felt) and sixth and final course of stone grit 6mm and down size
or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface
but excluding grading, complete.

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt As per IS 7193 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete.

₹ 502.65

Providing and laying six courses water proofing treatment with bitumen felt over
roofs consisting of first, third and fifth courses of blown or / and residual bitumen
applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second
and fourth courses of roofing felt As per IS 7193 Grade I (fibre base self finished
bitumen felt) six and final courses of stone grit 6mm and down size or pea sized
gravel spread at 6cu.dm per sqm including preparation of surface, excluding
grading, compete.

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt As per IS 7193 Grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, compete.

₹ 502.40

Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed
with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed
to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed
with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed
to air cure for 4 hours followed with water curing for 48 hours. The rate includes
preparation of surface, treatment and sealing of all joints, corners, junctions of
pipes and masonry with polymer mixed slurry.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

₹ 255.00

Providing and laying water proofing treatment on roofs of slabs by applying cement
slurry mixed with water proofing cement compound consisting of applying: a) after
surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with
water proofing cement compound @ 0.253 kg/ sqm. b) laying second layer of fibre
glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should
not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of
cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/
sqm and coarse sand @ 1.289 kg/ sqm. This will be allowed to air cure for 4 hours
followed by water curing for 48 hours. The entire treatment will be taken upto 30
cm on parapet wall and tucked into groove in parapet all around. d) fourth and
final layer of brick tiling with cement mortar (which will be paid for separately. For
the purpose of measurement the entire treated surface will be measured)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. b) laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/ sqm and coarse sand @ 1.289 kg/ sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)

₹ 356.75

Providing and laying water proofing treatment to vertical and horizontal surfaces
of depressed portions of W.C., kitchen and the like consisting of:
i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing
compound conforming to IS : 2645 in recommended proportions including rounding
off junction of vertical and horizontal surface.
ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with
water proofing compound in recommended proportion including rounding off
junction of vertical and horizontal surface.
iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm
of area.
iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet
should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).

₹ 449.45

ROUGH CAST PLASTER Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement Ordinary cement finish using ordinary cement

ROUGH CAST PLASTER Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement Ordinary cement finish using ordinary cement

₹ 372.00

Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.

Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.

₹ 254.00

17
18
19
20
21